WYTQW
Motor Power:0.75~110 kW Inlet/Outlet Range:DN50-DN200 QW Stainless Steel Submersible Sewage Pump
Head Range:7-60m
Motor Power:0.75~110 kW
Inlet/Outlet Range:DN50-DN200
Diving Depth:≤10 m

Application Scenarios
- Municipal and Industrial Sewage Discharge
- Construction and Engineering Drainage
- Agriculture and Environmental Protection
Product Advantage
Intelligent liquid level control
Float switch automatically starts and stops the pump body according to the change of water level, no need to be manned, enhancing the operation convenience—a critical feature in any sewage pump application, whether for a sewage lift pump or part of a complete sewage pump setup.
- Dual-rail coupling installation
| QW Stainless Steel Submersible Sewage Pump VS LW Vertical Dry‑installed Sewage Pump | ||
| Item | QW Stainless Steel Submersible Sewage Pump | LW Vertical Dry‑installed Sewage Pump |
| Installation Mode | Operates fully under water; supports auto‑coupling and mobile installation, no ground foundation needed | Dry installation above liquid level, fixed on concrete foundation, requires pump room or platform |
| Priming Requirement | No priming needed, direct startup when meeting minimum submergence depth | Needs priming before start; dry‑run will damage mechanical seal |
| Noise & Space | Low noise absorbed by water, saves ground space, no pump room required | Higher noise, takes up ground space, extra pump‑room investment needed |
| Maintenance | Needs hoisting out of sump for inspection and repair | Easy on‑ground maintenance without hoisting |
| WTY Conclusion: QW submersible sewage pump is suitable for projects with limited ground space. LW dry‑type pump is preferred for frequent‑maintenance occasions. | ||
FAQ for QW Stainless Steel Submersible Sewage Pump
Q1: What kind of media can QW stainless steel submersible sewage pump handle?
A: It is suitable for sewage containing solid particles and long‑fiber impurities. SS304 version works for general municipal wastewater; SS316 model can handle mildly corrosive sewage. Medium temperature shall not exceed 60℃, PH range 5‑9.
WTY Conclusion: This pump is a reliable choice for common municipal and building sewage lifting.
Q2: Does QW submersible sewage pump need priming before starting?
A: No priming is required. As long as the liquid level reaches the minimum submergence depth, the pump can start directly. But it shall not run when the motor part is exposed above water for long time.
WTY Conclusion: Submerged structure brings easy startup, avoiding priming work compared with dry‑type sewage pumps.
Q3: What installation options are available for QW stainless steel submersible sewage pump?
A: Two installation types are available: automatic coupling fixed installation for long‑term running, and mobile hose connection installation for temporary or emergency drainage.
WTY Conclusion: Dual‑installation design makes this pump adaptable to different site conditions.

